[arin-tech-discuss] Erroneous

[Daniel]

Tim Garrison <tgarrison at ...> writes:

> 
> Thanks, David. That cleared the issue right up!
> 
> Tim Garrison
> Software Engineer II
> tgarrison at ...
> 281.714.4213   direct
> 713.540.4325   cell
> 866.398.7638   toll-free
> 281.714.4657   fax
> 
> SoftLayer Technologies, Inc.
> 315 Capitol Street
> Suite 205
> Houston, TX 77002
> http://www.softlayer.com
> 
> -----Original Message-----
> From: David Huberman [mailto:dhuberma at ...] 
> Sent: Tuesday, February 19, 2013 12:24 PM
> To: Tim Garrison; arin-tech-discuss at ...
> Subject: Re: [arin-tech-discuss] Erroneous "IP range overlaps with
existing network(s)." errors
> 
> Hi Tim,
> 
> Thank you very much for your report. ARIN has corrected the issue, and all
your calls should now be working
> properly.  The problem was an artifact of a new software deployment
performed Saturday morning.  There
> were no adverse affects for the data in our registration system.
> 
> Regards,
> David
> 
> ---
> David R Huberman
> Principal Technical Analyst, ARIN
> 703-227-9866
> 
> On 2/19/13 10:32 AM, "Tim Garrison" <tgarrison at ...> wrote:
> 
> Greetings,
> 
> For the last 3 days, any attempt to reassign a subnet with the RESTful API
results in the following error:
> 
> <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <error
xmlns="http://www.arin.net/regrws/core/v1">
>     <additionalInfo/>
>     <code>E_ENTITY_VALIDATION</code>
>     <components>
>         <component>
>             <message>IP range overlaps with existing network(s).</message>
>             <name>startAddress</name>
>         </component>
>     </components>
>     <message>Payload entity failed to validate; see component messages for
details.</message> </error>
> 
> The subnet in question here is 173.193.174.104/29. I have verified that
there are no other subnet
> registrations in the adjacent space
> (173.193.174.0/25 was analyzed and found to contain  only subnets in
³Direct Allocation².
> 
> My sample reassign payload is as follows:
> 
> <?xml version="1.0"?>
> <net xmlns="http://www.arin.net/regrws/core/v1">
>     <version>4</version>
>     <comment></comment>
>     <netBlocks>
>         <netBlock>
>             <type>S</type>
>             <startAddress>173.193.174.104</startAddress>
>             <cidrLength>29</cidrLength>
>         </netBlock>
>     </netBlocks>
>     <customerHandle>C03321089</customerHandle>
>     <netName>NET-173-193-174-104</netName>
>     <parentNetHandle>NET-173-192-0-0-1</parentNetHandle>
> </net>
> 
> Has anything changed recently that would be causing this error? Is there
some other underlying issue
> causing this?
> 
> Thanks,
> 
> Tim Garrison
> Software Engineer II
> tgarrison at ...
> 281.714.4213   direct
> 713.540.4325   cell
> 866.398.7638   toll-free
> 281.714.4657   fax
> 
> SoftLayer Technologies, Inc.
> 315 Capitol Street
> Suite 205
> Houston, TX 77002
> http://www.softlayer.com
> 
> 

Is it possible that the problem is back in the OT&E environment? 

 if I do a whois on a specific IP, I get that nethandle : NET-72-10-165-8-1

but if I try to remove that reassign by making a DELETE on
/net/NET-72-10-165-8-1, I get this error

<?xml version="1.0" encoding="UTF-8" standalone="yes"?><error
xmlns="http://www.arin.net/regrws/core/v1"><additionalInfo/><code>E_OBJECT_NOT_FOUND</code><components><component><message>The
referenced object does not
exist.</message><name>handle</name></component></components><message>The
referenced object does not exist.</message></error>


if I try to reassign subnet to a customer, I get this error:        
<message>IP range overlaps with existing network(s).</message>

it's like if the whois part was not in sync with the arin part anymore..

the IP I'm testing with is 72.10.165.8/29 and I am using the OT&E for both
arin and whois.

thank you