[arin-ppml] Draft Policy ARIN-2017-5: Equalization of Assignment Registration requirements between IPv4 and IPv6

Paul McNary pmcnary at cameron.net
Mon Jul 24 14:53:18 EDT 2017


What does the new language say?
I then am totally confused as I am with the rest of the NPRM!

So many contradictions using Missouri English.

Paul


On 7/24/2017 1:22 PM, Owen DeLong wrote:
> That’s not what the new language actually says.
>
> Owen
>
>> On Jul 20, 2017, at 13:26 , Paul McNary <pmcnary at cameron.net> wrote:
>>
>> Yes
>>
>> /48 is the SWIP boundary. /48 is SWIP'ed.
>> /49 is not.
>>
>> Paul
>>
>>
>> On 7/20/2017 3:07 PM, Owen DeLong wrote:
>>> My recommendation was “shorter than /48” which would essentially mean the same thing.
>>>
>>> Owen
>>>
>>>> On Jul 17, 2017, at 15:46 , hostmaster at uneedus.com wrote:
>>>>
>>>> The language of "b)" actually makes more sense with a /47:
>>>>
>>>> Each static IPv6 assignment containing a /47 or more addresses, or subdelegation of any size that will be individually announced, shall be registered in the WHOIS directory via SWIP or a distributed service which meets the standards set forth in section 3.2.
>>>>
>>>> The major difference is that this language eliminates the SWIP requirement for /48 blocks that are not announced, but all larger blocks require SWIP, and blocks smaller than /48 are also exempt and of course also non-routeable.
>>>>
>>>> This is best for those that think SWIP should be limited to only blocks that are individually announced.  I could go either way on this issue.
>>>>
>>>> Albert Erdmann
>>>> Network Administrator
>>>> Paradise On Line Inc.
>>>>
>>>> On Mon, 17 Jul 2017, Leif Sawyer wrote:
>>>>
>>>>> Shepherd of the draft policy chiming in.
>>>>>
>>>>> Thanks for the lively discussion, everybody.   There's certainly a lot to think about here.
>>>>>
>>>>> Just as a reminder to folk, the current policy under question is located here:
>>>>> https://www.arin.net/policy/nrpm.html#six551
>>>>>
>>>>> And, to help clarify some confusion, per  6.5.5.3.1  (https://www.arin.net/policy/nrpm.html#six5531)
>>>>> residential customers "holding/64 and larger blocks"   may use censored data,  i.e.  "Private Customer/Residence"
>>>>> in lieu of actual names and street addresses.
>>>>>
>>>>> --
>>>>>
>>>>> With that said,  I have a couple of questions to ask, based on potential rewrites that are brewing.
>>>>>
>>>>> First:    Assuming a preference for /56  (based on PPML feedback)  for the moment,   which is the more
>>>>> preferential rewrite of the opening sentence of 6.5.5.1?
>>>>>
>>>>>
>>>>> a)      Each static IPv6 assignment containing a /55 or more addresses shall be registered in the WHOIS directory via SWIP or a distributed service which meets the standards set forth in section 3.2.
>>>>>
>>>>>
>>>>>
>>>>> b)      Each static IPv6 assignment containing a /55 or more addresses, or subdelegation of any size that will be individually announced, shall be registered in the WHOIS directory via SWIP or a distributed service which meets the standards set forth in section 3.2.
>>>>>
>>>>>
>>>>> Second:   Given your specific choice of A or B,  are you preferentially inclined to choose the provided bit-boundary, or "/48"
>>>>>
>>>>> Third:  If none of these options are palatable, do you have a proposed approach?
>>>>>
>>>>>
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Leif Sawyer
>>>>> Advisory Council
>>>>>
>>>>>
>>>> _______________________________________________
>>>> PPML
>>>> You are receiving this message because you are subscribed to
>>>> the ARIN Public Policy Mailing List (ARIN-PPML at arin.net).
>>>> Unsubscribe or manage your mailing list subscription at:
>>>> http://lists.arin.net/mailman/listinfo/arin-ppml
>>>> Please contact info at arin.net if you experience any issues.
>>> _______________________________________________
>>> PPML
>>> You are receiving this message because you are subscribed to
>>> the ARIN Public Policy Mailing List (ARIN-PPML at arin.net).
>>> Unsubscribe or manage your mailing list subscription at:
>>> http://lists.arin.net/mailman/listinfo/arin-ppml
>>> Please contact info at arin.net if you experience any issues.
>> _______________________________________________
>> PPML
>> You are receiving this message because you are subscribed to
>> the ARIN Public Policy Mailing List (ARIN-PPML at arin.net).
>> Unsubscribe or manage your mailing list subscription at:
>> http://lists.arin.net/mailman/listinfo/arin-ppml
>> Please contact info at arin.net if you experience any issues.
>
>




More information about the ARIN-PPML mailing list