[ppml] 2005-1 status
Marshall Eubanks
tme at multicasttech.com
Mon Jan 30 05:54:37 EST 2006
So, just to be clear, a site that is multihomed and in one physical
location will get a
/44 ?
Regards
Marshall
On Jan 29, 2006, at 10:39 PM, Kevin Loch wrote:
> This is the latest draft for the revision of 2005-1. We
> are interested in feedback before we submit it as the
> formal revision. For qualification purposes it is much
> closer to the original 2005-1. Unlike any previous version
> assignment size is variable (explained in the justification
> section).
>
> Add new definition in section 6.2 of the NRPM:
>
> 6.2.10 Physical Location
>
> A distinct physical location is identified by a unique street
> address within an organization. Different apartment, suite,
> room,
> unit or other similar identifiers at the same address for the
> same
> organization are not considered unique.
>
> Add new subsection in section 6.5 of the NRPM:
>
> 6.5.8. Direct assignments to large/multihomed end sites
>
> 6.5.8.1. To qualify for a direct assignment, an
> organization must:
>
> a) not be an IPv6 LIR;
> b) meet at least ONE of the following requirements:
>
> 1) Have an IPv4 assignment or allocation directly from an
> RIR,
> the IANA or legacy registry
> 2) Qualify for an IPv4 assignment or allocation from ARIN
> under
> the IPv4 policy currently in effect
> 3) Be currently multihomed using IPv6 to two or more separate
> LIR's using at least one /48 assigned to them by each LIR.
>
> 6.5.8.2. Direct assignment size to large/multihomed end sites
>
> Organizations that meet the direct end site assignment
> criteria
> are eligible to receive a direct assignment. The size of the
> assignment is based on the number of distinct physical
> locations
> where the assignment will be used. The following table
> will be
> used to determine the assignment size:
>
> +-------------------------+
> | Locations | Assignment |
> +------------+------------+
> | 1-13 | /44 |
> | 14-183 | /40 |
> | 184-2486 | /36 |
> | 2487-33688 | /32 |
> +------------+------------+
>
> For organizations requesting an assignment shorter than /
> 32 the
> HD ratio method will be used. For the HD ratio the
> utilization
> threshold is based on the numbmer of distinct physical
> locations that will be using IPv6. The HD ratio used
> will be
> the same as in section 6.5.2.2.
>
> 6.5.8.3. Subsequent Assignment Size
>
> An organization may receive an additional assignment
> when it
> has grown to include enough distinct physical locations to
> justify the larger assignment. Where possible, the
> assignment
> will be made from an adjacent address block.
>
> Justification:
>
> In IPv4 policy there are three major types of organizations that
> addresses are delegated to.
>
> o ISP's receive allocations directly from ARIN or from other ISP's
> o End Users receive assignments from ISP's
> o "Large" and/or multihomed End Users may receive assignments
> directly
> from ARIN.
>
> The third category is currently missing from IPv6 policy and
> this is believed to be severely hindering deployment by those
> organizations. In IPv6 policy-speak:
>
> o LIR's receive allocations directly from ARIN
> o End Sites receive assignments from LIR's
>
> This policy proposes:
>
> o "Large" and/or multihomed End Sites receive assignments directly
> from ARIN.
>
> This policy applies to organizations with networks that are
> large and/or complex enough to justify direct assignments. Like their
> IPv4 counterparts they do not make assignments to external
> organizations. They instead assign space internally to their own
> facilities. Similarly to IPv4 These internal assignments are not
> submitted to ARIN via swip/rwhois.
>
> A IPv6 network is considered eligible if it is multihomed.
> For transition purposes an organization with an IPv4 assignment or
> allocation from an RIR (or the legacy RIR) is automatically considered
> elligible, regardless of whether they were considered an ISP or End
> User under IPv4 policy. It is expected that the IPv6 only (non
> transition) requirements will be further refined as experience is
> gained.
>
> Since no /48's are assigned to external organizations, assignment size
> is determined solely by the number of distinct physical locations
> to be
> served (based on the 1 /48 per POP precedent for LIR's). It is
> expected
> that almost all assignments will fall between /44-/32. That assignment
> range has been limited to nibble boundaries to simplify reverse dns.
> The assignment thresholds for that range were determined using an HD
> ratio of 0.94 in accordance with 2005-5. A minimum assignment size of
> /44 is proposed to allow for some growth and flexibility of use for
> the
> smallest applicants. /32's are not assigned by default because it
> would
> be unnecessarilly wasteful for the vast majority of assignments.
>
> - Kevin
> _______________________________________________
> PPML mailing list
> PPML at arin.net
> http://lists.arin.net/mailman/listinfo/ppml
More information about the ARIN-PPML
mailing list